How To Get Rid Of Mold For Cleaning Professionals

by Kara Richards on September 30, 2018

There are several products that are useful if you’re looking at how to get rid of mold. In this guide, we’ll give you instructions on ways to use some of the best to get the job done.

How to Get Rid of Mold For Cleaning Professionals

How to Get Rid of Mold For Cleaning Professionals

Mold is not only a nuisance, but it can also be a potential health concern. Black mold can cause respiratory issues, and other forms could lead to allergic reactions. Fortunately, there are several substances that you can use to kill off mold and mildew in your home. In this helpful guide, we’ll tell you how to formulate several different common household products into solutions that will eliminate the problem. As long as the growth is less than ten square feet in total size, you can do it yourself without needing to call in a professional to help.

Here are recommendations on how to get rid of mold for good.

Effective Products That Remove Mold

There are lots of different products that have properties that will kill off mold. Among the mostcommon and effective are:

  • Bleach
  • Borax
  • Vinegar
  • Ammonia
  • Hydrogen peroxide
  • Detergent
  • Baking soda
  • Tea tree oil
  • Grapefruit seed extract

We will discuss each one in detail and include information on how it works, tips to mix the right solution, and any other tidbits you need to know kill mold safely and effectively.

How to Get Rid of Mold with Bleach

How to Get Rid of Mold with Bleach

Image via howtoremoveblackmold

When a mold problem pops up, most people immediately think that bleach is the answer. Although it is incredibly effective at killing off practically every species out there while also destroying the spores so that it doesn’t come back, there are a few potential drawbacks that might not make it the best choice for you. Bleach can only be safely used on non-porous surfaces like your bathroom tile or countertops.

If you have mold growing on a porous material like the drywall in your home or wood on your property, you’ll need to choose another substance. Bleach can’t penetrate the material and kill off the problem at the source, which means it will grow back. Bleach also releases strong fumes and should only be used in areas that have good ventilation. Avoid using it in confined spaces with stagnant air, and wear gloves when cleaning with the substance to avoid skin irritation.

It’s also very important that you never mix bleach and ammonia because this creates a toxic gas that can cause serious respiratory issues. Read product labels and make sure that you don’t use an ammonia-based glass cleaner or a product with white vinegar when you’re killing mold with bleach. You can purchase a pre-mixed bleach-based cleaner to treat your mold problem, or you can mix one up at home.

Combine one cup of bleach with one gallon of water and mix it well. You can then either dip in a sponge or scrub brush to use on your non-porous surfaces, or pour the solution into a spray bottle for easy application.Once the mold is removed, you can rinse off the surface or leave the bleach to soak in and serve as a deterrent for mold growth in the future.

How to Get Rid of Mold with Borax

How to Get Rid of Mold with Borax

Image via howtoremoveblackmold

You can find the white mineral powder Borax at your supermarket in the laundry section. It’s an effective mold killer because of its high pH and is a popular choice because it doesn’t produce any dangerous fumes when you use it to clean. It’s commonly used as a toilet and drain cleaner, and also has deodorizing properties. It naturally kills fungus and is also an effective herbicide and insecticide.

One drawback to Borax, however, is that it’s extremely toxic if swallowed. If you have small children or pets who might accidentally expose themselves to the substance, there could be severe consequences. Be sure to store it out of reach and take care to keep curious paws and hands far away if you use it to clean. If you’re wondering how to get rid of mold with Borax, you’ll first need to create an effective solution. Combine one cup of borax with one gallon of water. Dip a scrub brush into the mix and apply it to any surfaces that have mold growth. Once it’s clean, wipe it down thoroughly to remove any spores, particles, or debris that could spread into the air when the solution dries. Allow the surface to naturally dry. There’s no need to rinse it once it’s clean.

How to Get Rid of Mold with Vinegar

How to Get Rid of Mold with Vinegar

Image via servicemasterdallas

A common household ingredient that is an effective mold killer is white distilled vinegar. It’s great in salad dressings, and also has the power to eliminate 82 percent of the mold species that could grow in your home. It’s non-toxic, inexpensive, and doesn’t give off any harmful fumes or contain dangerous chemicals that aren’t safe around children or pets. It works because it’s mildly acidic which creates an environment in which mold can not grow.

To use it, pour the white vinegar into a spray bottle. You don’t need to mix it with water; it will work best in its pure form. Next, spray the vinegar directly onto the moldy surface and let it soak for up to an hour.Finally, wipe the area clean with a damp towel to remove the dead mold and any spores. Allow it to dry completely. The smell of the vinegar should fade once the surface is dry.

How to Get Rid of Mold with Ammonia

How to Get Rid of Mold with Ammonia

Image via rd

Ammonia is another common chemical that’s used to kill mold on non-porous surfaces. Like bleach, it won’t penetrate into drywall or wood, and it’s also a chemical that’s toxic. It’s crucial that you never mix bleach and ammonia because the resulting gas can cause serious health complications. In fact, the mixture is so dangerous that it was weaponized and used in World War 2.

To create a mold killing mixture, combine equal parts clear ammonia with water to make a 50/50 solution in a spray bottle. Apply it directly to the affected area and allow it to soak for several hours.Next, wipe the dead mold off of the area and then rinse it thoroughly.

How to Get Rid of Mold with Hydrogen Peroxide

How to Get Rid of Mold with Hydrogen Peroxide

Image via rootandrevel

Hydrogen peroxide is a multi-tasker that’s effective at killing viruses, bacteria, fungus, and mold. It’s a favorite for getting rid of spores because it’s both safe and effective and it doesn’t produce toxic fumes or residues that can be dangerous to children and pets.

It’s also a good choice for both porous and non-porous surfaces and can effectively eliminate mold on everything from tile to fabric. However, it is a bleaching agent and can sometimes fade the material to which it’s applied, so be sure to test a small, discreet area first to ensure you’re happy with the results. For best results, purchase a bottle of 3 percent concentration hydrogen peroxide and pour the contents into a spray bottle. Apply it to the affected surface taking care to saturate the area completely. Let it sit for a full ten minutes and then scrub the area with a brush to completely remove both the dead mold and any stains left behind. Wipe everything down when you’re done. If you have leftover hydrogen peroxide in the spray bottle, be sure to store it in a cool, dark place. Light exposure can make it less potent over time.

How to Get Rid of Mold with Baking Soda

How to Get Rid of Mold with Baking Soda

Image via rootandrevel

Like borax, baking soda has a high pH that makes it a valid choice for killing off mold in your home. It’s safe to use and a natural option that also deodorizes the area at the same time it sanitizes it. Many people combine vinegar with baking soda because the two substances are effective at killing different species of mold. The method to use baking soda to get rid of mold is to make a solution of a quarter tablespoon of baking soda in a spray bottle full of water. Shake well to dissolve the powder and then spray it directly on the mold growth.

Let it sit for a few minutes, and then use a scrub brush to remove the mold residue from the surface. Rinse it with water, and pat it dry. Then spray the area with the solution a second time and let it air dry naturally. This final step will kill any lingering spores and prevent the mold from growing back.

How to Get Rid of Mold with Tea Tree Oil

How to Get Rid of Mold with Tea Tree Oil

Image via parenting.firstcr

Another natural substance that’s extremely effective at killing mold is tea tree oil. It is both antibacterial and antifungal, and because it is an essential oil, it’s harmless if it is accidentally ingested. Although it is expensive, you don’t need much to make a strong solution if you buy the good stuff. Make sure that the one you purchase is derived from a true tea tree plant or Melaleuca Alternifolia for the best potency. The oil has a strong smell. Some people enjoy it, but if you don’t, know that it will fade within a few hours of application.

To mix up an effective solution, combine one teaspoon of tea tree oil per cup of water in a spray bottle. For example, if your spray bottle holds four cups of water, you’ll need four teaspoons to get the ratio right.Then, spray the solution directly onto the moldy area. You can scrub it if needed to loosen the growth and wipe away the spores, or you can let it soak in. There’s no need to rinse when you’re finished because it’s safe and natural, and leaving the residue behind will actually prevent the mold from regrowing.

How to Get Rid of Mold with Grapefruit Seed Extract

How to Get Rid of Mold with Grapefruit Seed Extract

Image via halegroves

Another method of how to get rid of mold is to use grapefruit seed extract. Similar to tea tree oil in that it’s a natural substance with antifungal properties, one advantage is that it’s nearly odorless and is an excellent choice if you don’t like strong smells. It works by using the citric acid in the seed to attack and kill the mold while deodorizing and disinfecting the area.

Grapefruit seed extract is also expensive, but you can find it at most natural or health food stores. Mix ten drops of the extract in one cup of water and pour it into a spray bottle. Give it a good shake to mix the solution, and then spray it directly on the affected surface. Let it sit for at least 15 minutes before wiping away the dead mold. If there is still growth or staining, you can do a second treatment to kill the rest of the colony. Grapefruit seed extract has a long shelf life, and you can store the solution in a cool, dry place to use again as needed.

Leave a Comment

Previous post:

Next post: